Author Topic: "Warn, Couldn't read polling interval, set default 500ms"  (Read 320 times)

Tony Neen

  • Newbie
  • *
  • Posts: 8
"Warn, Couldn't read polling interval, set default 500ms"
« on: November 29, 2017, 10:22:16 AM »
Anyone know what:

"Warn, Couldn't read polling interval, set default 500ms"

On Coin Kit Diagnostic page means ?

Cheers
Tony

Bry

  • Administrator
  • Sr. Member
  • *****
  • Posts: 355
    • Jukeblaster.com
Re: "Warn, Couldn't read polling interval, set default 500ms"
« Reply #1 on: November 30, 2017, 08:57:26 AM »
it means that ur coin mech either dont have a polling interval setting or coinkit cant get interval from the mech

Tony Neen

  • Newbie
  • *
  • Posts: 8
Re: "Warn, Couldn't read polling interval, set default 500ms"
« Reply #2 on: November 30, 2017, 10:50:21 AM »
Cheers, no need to worry then, Ta

Bry

  • Administrator
  • Sr. Member
  • *****
  • Posts: 355
    • Jukeblaster.com
Re: "Warn, Couldn't read polling interval, set default 500ms"
« Reply #3 on: December 01, 2017, 08:27:07 AM »
if it works thers no need to worry what model is coin mech ?

Tony Neen

  • Newbie
  • *
  • Posts: 8
Re: "Warn, Couldn't read polling interval, set default 500ms"
« Reply #4 on: December 01, 2017, 09:24:34 AM »
Hi, it's a SR3 coin mech. It's just something i was looking into to try and sort the problems i was having with the cheap PL2303HX USB to TTL to UART RS232 COM Cables.

Cheers