JukeBlaster.com Forum

General Category => Coin Kit ccTalk software => Topic started by: gadget_12000 on April 26, 2017, 07:31:15 PM

Title: cctalk kit be used to program mechs for new coin
Post by: gadget_12000 on April 26, 2017, 07:31:15 PM

Hi Bry . Can the cctalk kit be used to program the new £1 con on to cctalk mech sr3 ?????

Title: Re: cctalk kit be used to program mechs for new coin
Post by: Steve on April 26, 2017, 08:33:50 PM

Hi gadget

Our Bry does not monitor the forum so there is no point in addressing your question directly to him, he will never reply!.

However, I will put your question to him in person as I think this sounds like a good question that might affect a lot of people.
If he has an answer I will post it here.

http://jukeblaster.com/forum/index.php?topic=156.0

Steve

Title: Re: cctalk kit be used to program mechs for new coin
Post by: Steve on April 27, 2017, 01:07:33 PM

Ok gadget, I asked our Bry and he said you program the sr3 for the new pound coin using the 'teach & run method', i dont know how to do this myself so just try to google "sr3 teach and run" to see if you can find out more.