Author Topic: ccTalk wiring tutorial  (Read 1250 times)

Steve

  • Administrator
  • Hero Member
  • *****
  • Posts: 1834
    • Jukeblaster.com
ccTalk wiring tutorial
« on: February 24, 2015, 10:22:05 AM »
ccTalk video tutorial shows how to wire a serial coin acceptor to your PC

https://www.youtube.com/watch?v=CCpXqio99eg

ruby

  • Jr. Member
  • **
  • Posts: 12
Re: ccTalk wiring tutorial
« Reply #1 on: July 07, 2016, 02:05:43 PM »
Hi

One of the videos on youtube shows a board that connects from USB to a Ribbon cable.
Was wondering if you do this board as cant seem to find it on your website.
https://www.youtube.com/watch?v=lidRiXhsPa8

Thanks

Steve

  • Administrator
  • Hero Member
  • *****
  • Posts: 1834
    • Jukeblaster.com
Re: ccTalk wiring tutorial
« Reply #2 on: July 07, 2016, 02:43:24 PM »
Hi ruby

We dont have those boards anymore, we now just use a serial cable & Coin Kit, watch this video that shows you how to make your own serial cable:- http://jukeblaster.com/forum/index.php?topic=1147.0

Coin Kit is here:- http://jukeblaster.com/index.php?page=detail&get_id=28&category=


eddiegravestock

  • Full Member
  • ***
  • Posts: 32
Re: ccTalk wiring tutorial
« Reply #3 on: April 20, 2017, 10:56:15 PM »
I have one of these boards does it work with pub juke blaster
I bought it a while back but only just about to try and use it

thanks
Eddie

Birdj5@hotmail.co.uk

  • Newbie
  • *
  • Posts: 3
Re: ccTalk wiring tutorial
« Reply #4 on: March 29, 2018, 09:31:24 AM »
Thank you for the excellent video - which shows the wiring for this type of mech.  I have the cashflow type (330), does anyone have any documentation for this?

Many thanks!

Steve

  • Administrator
  • Hero Member
  • *****
  • Posts: 1834
    • Jukeblaster.com
Re: ccTalk wiring tutorial
« Reply #5 on: March 29, 2018, 09:40:02 AM »
I think the cashflow 330 is not a ccTalk device so it wont work, check this manual I found on google:- http://www.microelec.co.uk/Assets/Technical%20Information/CF330PMH.pdf

Birdj5@hotmail.co.uk

  • Newbie
  • *
  • Posts: 3
Re: ccTalk wiring tutorial
« Reply #6 on: March 29, 2018, 09:48:16 AM »
Thank you Steve - I found this too, and was unsure if it was compatible.  I guess I should look for one like you used!

Steve

  • Administrator
  • Hero Member
  • *****
  • Posts: 1834
    • Jukeblaster.com
Re: ccTalk wiring tutorial
« Reply #7 on: March 29, 2018, 09:52:13 AM »
Our Bry says that the SR5 & SR3 models are best but a lot of ccTalk acceptors may work, did a quick ebay search and found some there:- https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR0.TRC0.H0.Xsr3+coin+acceptor.TRS0&_nkw=sr3+coin+acceptor&_sacat=0