Author Topic: Coin Mech  (Read 250 times)

TheMillBox

  • Newbie
  • *
  • Posts: 8
Coin Mech
« on: September 04, 2018, 11:30:22 AM »
Hi, ive bought this;
https://www.ebay.co.uk/itm/Multi-Coin-Slot-Selector-Acceptor-for-Arcade-Gaming-Vending-Machine-CPU-Control/332435532430?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

I bought it when i was first planning out my system, had a little bit of trouble this morning with cctalk that it didnt recognise it, ive ordered a proper usb/com adaptor to just incase its my bad wiring skills. or will this acceptor not work with cctalk?  also have the fun of having lost the instructions incase any one has a copy if they use the same model.

Thanks for any help


Steve

  • Administrator
  • Hero Member
  • *****
  • Posts: 1868
    • Jukeblaster.com
Re: Coin Mech
« Reply #1 on: September 04, 2018, 07:17:41 PM »

TheMillBox

  • Newbie
  • *
  • Posts: 8
Re: Coin Mech
« Reply #2 on: September 06, 2018, 08:46:44 PM »
Thank you
ordered one now, machine is looking good :)

TheMillBox

  • Newbie
  • *
  • Posts: 8
Re: Coin Mech
« Reply #3 on: September 25, 2018, 03:15:04 PM »
Having trouble
coin acseptor all wired upi led is green, when i load coinkit up and try to detect the device i get a error message of
"access deined to Com6 it may be in use.

any ideas?

ive checked security for the all and given it full controll, but lost for idea to try now

Steve

  • Administrator
  • Hero Member
  • *****
  • Posts: 1868
    • Jukeblaster.com
Re: Coin Mech
« Reply #4 on: September 25, 2018, 08:21:39 PM »
Hi milbox, its a conflict with your commports, in windows open 'Controll panel -- >Device Manager' and check which comport your usb cable is connected to, you can change all comport settings here.