JukeBlaster.com Forum

General Category => Coin Kit ccTalk software => General Discussion => Topic started by: TheMillBox on September 04, 2018, 11:30:22 AM

Title: Coin Mech
Post by: TheMillBox on September 04, 2018, 11:30:22 AM

Hi, ive bought this;
https://www.ebay.co.uk/itm/Multi-Coin-Slot-Selector-Acceptor-for-Arcade-Gaming-Vending-Machine-CPU-Control/332435532430?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

I bought it when i was first planning out my system, had a little bit of trouble this morning with cctalk that it didnt recognise it, ive ordered a proper usb/com adaptor to just incase its my bad wiring skills. or will this acceptor not work with cctalk?  also have the fun of having lost the instructions incase any one has a copy if they use the same model.

Thanks for any help

Title: Re: Coin Mech
Post by: Steve on September 04, 2018, 07:17:41 PM

Hi MillBox

That Coin acceptor is not ccTalk, it's a pulse cm so it wont work.

Search eBy for SR3 & SR5...

Example SR3:- https://www.ebay.co.uk/itm/Money-Controls-SR3-Coin-Operations/192630151385?hash=item2cd9a6d8d9:g:NTgAAOSw7MValaWA

Example SR5 :- https://www.ebay.co.uk/itm/SR5-COIN-MECH-ON-NEW-1-COIN/312068084373?hash=item48a8b51295:g:Hs0AAOSw5nxahbDk


Steve

Title: Re: Coin Mech
Post by: TheMillBox on September 06, 2018, 08:46:44 PM

Thank you
ordered one now, machine is looking good :)

Title: Re: Coin Mech
Post by: TheMillBox on September 25, 2018, 03:15:04 PM

Having trouble
coin acseptor all wired upi led is green, when i load coinkit up and try to detect the device i get a error message of
"access deined to Com6 it may be in use.

any ideas?

ive checked security for the all and given it full controll, but lost for idea to try now

Title: Re: Coin Mech
Post by: Steve on September 25, 2018, 08:21:39 PM

Hi milbox, its a conflict with your commports, in windows open 'Controll panel -- >Device Manager' and check which comport your usb cable is connected to, you can change all comport settings here.