General Category > General Discussion

Dj4nrv's Bar/Countertop Project

(1/1)

Dj4nrv:
Started life as a 12" sub box.
I cut the holes for the Pc, fans and speakers.
Added fan and speaker grilles.
Fixed pc in place.

Pic 1 link here. http://yfrog.com/7b33901693j
Pic 2 link here. http://yfrog.com/0z14407621j

Dj4nrv:
Now the box is carpeted. In Dark Grey Speaker cloth.
I've added brass corner protectors and brass screws all round on speaker grilles and brass corners.

Next i shall cut the holes for the fans in the carpet and put the fan grilles back in place.

Pic 1 link here. http://yfrog.com/b916318235j
Pic 2 link here. http://yfrog.com/0965288443j
Pic 3 link here. http://yfrog.com/6318505946j

Dj4nrv:
Got a lil bit more done.
Cut holes in the carpeted sides for the fan and put the speaker connector back in the other side too, to allow for external speaker from the internal amp.

I raised the screen from the cab to allow the frame/bezel to sit tighter to the screen.

Cut the space for the power supply in the back. Still needs a little attention. Its a bit untidy?

Still have to fit a fan to get air out, fix the bezel in place.

And quite a bit more!

Heres pics.

Front  http://yfrog.com/6428505863j
Rear   http://yfrog.com/1481779635j
FrontL http://yfrog.com/6441377827j
FrontR http://yfrog.com/3d28067482j
Close   http://yfrog.com/0364986479j

Dj4nrv:
seems theres a problem with the links??

so heres where we are up to.

Dj4nrv:
and the untidy back.

Navigation

[0] Message Index