Author Topic: Connect coin acceptor to software  (Read 9320 times)

xmiker

  • Newbie
  • *
  • Posts: 5
Connect coin acceptor to software
« on: December 02, 2016, 08:32:39 AM »
Hi.
I try trial version of software to connect cctalk coin acceptor to PC. All wires like in scheme. I use USM-COM adapter Prolific PL2303 and Silicon Labs CP210x. In software coin acceptor detected (I try to connect EMP800, NRI G-13, SR3, Microcoin SP). But then software writes: failed to map coin. What does it mean? What can I do to connect coin acceptor to software?
Thanks.

Steve

  • Administrator
  • Hero Member
  • *****
  • Posts: 2313
    • Jukeblaster.com
Re: Connect coin acceptor to software
« Reply #1 on: December 02, 2016, 05:41:17 PM »
Hi xmiker

'Failed to map coin' means the coin acceptor did not reply (timeout).
Can you show some pictures of your wiring to the SR3 ?.

Steve
Send us some crypto :-)
It helps us pay for the forum and new jukebox developments


Bitcoin
bc1qlfjvxfpj75wcpraa5phvvxjpc9w7dxhd8y9s0k

Doge
DGvvJZ6JNxcGtSSbgjaNE5zDe13YWwaPVE


xmiker

  • Newbie
  • *
  • Posts: 5
Re: Connect coin acceptor to software
« Reply #2 on: December 05, 2016, 07:19:07 AM »
Hi.
Thank you for your answer.
I think maybe SR3 not in CCTalk protocol? But I try some another coin acceptors: EMP, Microcoin SP.

Steve

  • Administrator
  • Hero Member
  • *****
  • Posts: 2313
    • Jukeblaster.com
Re: Connect coin acceptor to software
« Reply #3 on: December 05, 2016, 09:09:07 AM »
Hi xmiker

Ok, wiring looks correct, 2 things to try...

1. check your comm port is set to 9600 baud rate
2. change usb cable to this one:- http://www.ebay.co.uk/itm/USB-to-RS232-TTL-PL2303HX-ble-Adapter-COM-Module-Converter-Adapter-Arduino-/322099557451?hash=item4afea1344b:g:HPUAAOSwEjFXfqVQ

Steve
Send us some crypto :-)
It helps us pay for the forum and new jukebox developments


Bitcoin
bc1qlfjvxfpj75wcpraa5phvvxjpc9w7dxhd8y9s0k

Doge
DGvvJZ6JNxcGtSSbgjaNE5zDe13YWwaPVE


Bry

  • Administrator
  • Sr. Member
  • *****
  • Posts: 377
    • Jukeblaster.com
Re: Connect coin acceptor to software
« Reply #4 on: December 07, 2016, 09:11:50 AM »
that rs232 adapter in picture 3 is wrong
it probably has wrong voltage may damage the sr3, it might be giving out 9v wich is too much, u need the prolific PL2303HX which gives 5v (logic level output).
Send us some crypto :-)
It helps us us pay for the forum and new jukebox developments


Bitcoin
bc1qz9wd2ymdnjy3ge5h7fjlrdc2zt0grry0ugwwv4

Ethereum
0xC3bB19c7078055117f2481ACb81587d6Da343B0E

Doge
DGvvJZ6JNxcGtSSbgjaNE5zDe13YWwaPVE


xmiker

  • Newbie
  • *
  • Posts: 5
Re: Connect coin acceptor to software
« Reply #5 on: December 07, 2016, 02:13:38 PM »
Hi.
Com port - 9600.
My USB-COM is Prolific PL2303HXD.
Is it different from PL2303HX?

Can I connect directly to COM-port without USB converter?

xmiker

  • Newbie
  • *
  • Posts: 5
Re: Connect coin acceptor to software
« Reply #6 on: December 08, 2016, 11:02:59 AM »
Stupid question ))) I need MAX232 to connect to COM directly.

Bry

  • Administrator
  • Sr. Member
  • *****
  • Posts: 377
    • Jukeblaster.com
Re: Connect coin acceptor to software
« Reply #7 on: December 08, 2016, 03:36:28 PM »
You need USB to TTL (5v), comport is higher voltage
Send us some crypto :-)
It helps us us pay for the forum and new jukebox developments


Bitcoin
bc1qz9wd2ymdnjy3ge5h7fjlrdc2zt0grry0ugwwv4

Ethereum
0xC3bB19c7078055117f2481ACb81587d6Da343B0E

Doge
DGvvJZ6JNxcGtSSbgjaNE5zDe13YWwaPVE


xmiker

  • Newbie
  • *
  • Posts: 5
Re: Connect coin acceptor to software
« Reply #8 on: December 09, 2016, 07:37:29 AM »
Hi.
Yesterday I tried connect coinacceptor via Circuit 1 - ccTalk Standard Interface (from CCTalk documentation part 3). Coinacceptor EMP800 is working fine.

Bry

  • Administrator
  • Sr. Member
  • *****
  • Posts: 377
    • Jukeblaster.com
Re: Connect coin acceptor to software
« Reply #9 on: December 09, 2016, 08:42:57 PM »
very goo d then maybe that usb lead gives ttl level outputs
Send us some crypto :-)
It helps us us pay for the forum and new jukebox developments


Bitcoin
bc1qz9wd2ymdnjy3ge5h7fjlrdc2zt0grry0ugwwv4

Ethereum
0xC3bB19c7078055117f2481ACb81587d6Da343B0E

Doge
DGvvJZ6JNxcGtSSbgjaNE5zDe13YWwaPVE