JukeBlaster.com Forum
General Category => Coin Kit ccTalk software => Wiring-up => Topic started by: Steve on February 24, 2015, 10:22:05 AM
-
ccTalk video tutorial shows how to wire a serial coin acceptor to your PC
https://www.youtube.com/watch?v=CCpXqio99eg
-
Hi
One of the videos on youtube shows a board that connects from USB to a Ribbon cable.
Was wondering if you do this board as cant seem to find it on your website.
https://www.youtube.com/watch?v=lidRiXhsPa8
Thanks
-
Hi ruby
We dont have those boards anymore, we now just use a serial cable & Coin Kit, watch this video that shows you how to make your own serial cable:- http://jukeblaster.com/forum/index.php?topic=1147.0
Coin Kit is here:- http://jukeblaster.com/index.php?page=detail&get_id=28&category=
-
I have one of these boards does it work with pub juke blaster
I bought it a while back but only just about to try and use it
thanks
Eddie
-
Thank you for the excellent video - which shows the wiring for this type of mech. I have the cashflow type (330), does anyone have any documentation for this?
Many thanks!
-
I think the cashflow 330 is not a ccTalk device so it wont work, check this manual I found on google:- http://www.microelec.co.uk/Assets/Technical%20Information/CF330PMH.pdf
-
Thank you Steve - I found this too, and was unsure if it was compatible. I guess I should look for one like you used!
-
Our Bry says that the SR5 & SR3 models are best but a lot of ccTalk acceptors may work, did a quick ebay search and found some there:- https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR0.TRC0.H0.Xsr3+coin+acceptor.TRS0&_nkw=sr3+coin+acceptor&_sacat=0