Will not activate coin kit board

[ROY-SCOTT]

When the system starts the coin kit board is not activated, i.e. no flashing LED. If the USB cable is unplugged from the computer and re-plugged all is well. I am using XP and everything else fires up as wanted.

[Bry]

most likley is the bios on ur mobo doesnt nativley support usb directly
check in ur bios setting sto see if it can bee enabled

[ROY-SCOTT]

I have tried the coin kit board with 3 different computers and the same thing happens. My computer sees the touch screen and external drive but not the coin kit board. Just a bit lost now.

[cyberbob]

I had this m8

In bois you want legacey support, usb on and usb keyboard support on.

mine worked ok then.

look at usb options and usb keyboard support im sure its that.

[ROY-SCOTT]

Many thanks for the ideas. Unfortunately it still refuses to come up correctly. I have an ELO touch screen into the USB and that has no problem. The only thing that i have noticed in the control panel/system is that the usb location for both devices is 0, correct or not?
Thanks again

Roy

[stampy69]

if you have front usb ports in the comp try them........2 of kits did this, never really worked out why but i noticed they performed better in the front ports.

possible a motherboard issue......are you using the same cable also when you swap it into another machine....try new cable??