JukeBlaster.com Forum
General Category => Coin Kit => General Discussion => Topic started by: CENTRAL69 on December 03, 2013, 05:45:44 PM
-
hello I am having trouble setting up the ch926 coin acceptor to the software regarding the correct credits. while I was resetting the coin acceptor due to me doing it wrong I noticed the blue light doesn't flash on the coin kit anymore.do I have to reset it.....my first time doing forums as well, so could do with some help please.
all I want to do is set up 50p for 1 credit and £1 for 5 credits...I take it the pulse gives the value....
-
if the blue led is not flashing then u could hav it connected up wrong, could have smoked it :-(, myadvice is remove all wires and try again see if led flashes
-
i have had it connected up,and it has been lit up blue.it has been mounted on a bit of pps material which is a insulator.had it mounted in a box,all connected up to the ch926 coin mc. it was working fine.i just hadnt set up the coin pulses correct,so i reset the ch926 so i could begin again and it hasnt lit up since.so if this is broke i suppose i have to buy another one at £50 then.......... >:(
-
Hi Central
Have you followed our Bry's advice above ?.
Can you show a picture of the wiring etc.
-
I have checked the wiring, all seems ok. as I said it was working. I am trying to send a picture but I keep getting error come up. have even zipped it. :(
-
It needs to be a JPG image.
-
have tried sending jpeg and a zipped file.all I get is an error has occurred file to big or contact server admin the pic is 2mb
-
Yes the pic is too big..
I see your car can fly Mr Bond, lol :-)
-
here is the coin board wired up
-
and here is my smashing box ive done.it just don't work...lol ;D
-
so do you think that something may be wrong with the coin board...
or am I a div and done something wrong...... :)
-
Hi central
I opened up a Coin Kit to have a look and from what I can tell in your first picture it looks like you may have the Ground (Gnd) and the Coin (Coin) lines crossed over.
(Ps: my judgement is only based on the wire colours)
-
yup.i had the two wires round the wrong way. still don't work....my stupidity...don't know how the light was blue when it was wired wrong :..........so looks like ive damaged the board...do I have to pay £50 again or can this be fixed....idiots rates.....
:( :( :( :( :( :( :( :( :( :( :( :( :( :( :(
-
Arrrrgh :o, sorry to hear that central, unfortunately its not economical to repair :'(, just get another (and be careful wiring).
-
One thing i forgot to say is that you also need to check that the coin output line is not damaged on your coin acceptor as well :-/, I will ask our Bry how to do this when I see him as I'm not %100 sure myself, if anyone else knows please help...