Author Topic: coin kit/CH 926 ACCEPTOR  (Read 8529 times)

CENTRAL69

  • Jr. Member
  • **
  • Posts: 12
coin kit/CH 926 ACCEPTOR
« on: December 03, 2013, 05:45:44 PM »
hello I am having trouble setting up the ch926 coin acceptor to the software regarding the correct credits. while I was resetting the coin acceptor due to me doing it wrong I noticed the blue light doesn't flash on the coin kit anymore.do I have to reset it.....my first time doing forums as well, so could do with some help please.
all I want to do is set up 50p for 1 credit and £1 for 5 credits...I take it the pulse gives the value....

Bry

  • Administrator
  • Sr. Member
  • *****
  • Posts: 377
    • Jukeblaster.com
Re: coin kit/CH 926 ACCEPTOR
« Reply #1 on: December 04, 2013, 10:38:13 AM »
if the blue led is not flashing then u could hav it connected up wrong, could have smoked it :-(, myadvice is remove all wires and try again see if led flashes
Send us some crypto :-)
It helps us us pay for the forum and new jukebox developments


Bitcoin
bc1qz9wd2ymdnjy3ge5h7fjlrdc2zt0grry0ugwwv4

Ethereum
0xC3bB19c7078055117f2481ACb81587d6Da343B0E

Doge
DGvvJZ6JNxcGtSSbgjaNE5zDe13YWwaPVE


CENTRAL69

  • Jr. Member
  • **
  • Posts: 12
Re: coin kit/CH 926 ACCEPTOR
« Reply #2 on: December 04, 2013, 12:44:16 PM »
i have had it connected up,and it has been lit up blue.it has been mounted on a bit of pps material which is a insulator.had it mounted in a box,all connected up to the ch926 coin mc. it was working fine.i just hadnt set up the coin pulses correct,so i reset the ch926 so i could begin again and it hasnt lit up since.so if this is broke i suppose i have to buy another one at £50 then.......... >:(

Steve

  • Administrator
  • Hero Member
  • *****
  • Posts: 2313
    • Jukeblaster.com
Re: coin kit/CH 926 ACCEPTOR
« Reply #3 on: December 04, 2013, 08:19:51 PM »
Hi Central
Have you followed our Bry's advice above ?.
Can you show a picture of the wiring etc.
Send us some crypto :-)
It helps us pay for the forum and new jukebox developments


Bitcoin
bc1qlfjvxfpj75wcpraa5phvvxjpc9w7dxhd8y9s0k

Doge
DGvvJZ6JNxcGtSSbgjaNE5zDe13YWwaPVE


CENTRAL69

  • Jr. Member
  • **
  • Posts: 12
Re: coin kit/CH 926 ACCEPTOR
« Reply #4 on: December 04, 2013, 10:44:42 PM »
I have checked the wiring, all seems ok. as I said it was working. I am trying to send a picture but I keep getting error come up. have even zipped it. :(

Steve

  • Administrator
  • Hero Member
  • *****
  • Posts: 2313
    • Jukeblaster.com
Re: coin kit/CH 926 ACCEPTOR
« Reply #5 on: December 04, 2013, 11:02:45 PM »
It needs to be a JPG image.
Send us some crypto :-)
It helps us pay for the forum and new jukebox developments


Bitcoin
bc1qlfjvxfpj75wcpraa5phvvxjpc9w7dxhd8y9s0k

Doge
DGvvJZ6JNxcGtSSbgjaNE5zDe13YWwaPVE


CENTRAL69

  • Jr. Member
  • **
  • Posts: 12
Re: coin kit/CH 926 ACCEPTOR
« Reply #6 on: December 05, 2013, 05:15:14 PM »
have tried sending jpeg and a zipped file.all I get is an error has occurred file to big or contact server admin the pic is 2mb

Steve

  • Administrator
  • Hero Member
  • *****
  • Posts: 2313
    • Jukeblaster.com
Re: coin kit/CH 926 ACCEPTOR
« Reply #7 on: December 05, 2013, 07:40:17 PM »
Yes the pic is too big..

I see your car can fly Mr Bond, lol :-)
Send us some crypto :-)
It helps us pay for the forum and new jukebox developments


Bitcoin
bc1qlfjvxfpj75wcpraa5phvvxjpc9w7dxhd8y9s0k

Doge
DGvvJZ6JNxcGtSSbgjaNE5zDe13YWwaPVE


CENTRAL69

  • Jr. Member
  • **
  • Posts: 12
Re: coin kit/CH 926 ACCEPTOR
« Reply #8 on: December 05, 2013, 08:30:29 PM »
here is the coin board wired up

CENTRAL69

  • Jr. Member
  • **
  • Posts: 12
Re: coin kit/CH 926 ACCEPTOR
« Reply #9 on: December 05, 2013, 08:32:44 PM »
and here is my smashing box ive done.it just don't work...lol ;D

CENTRAL69

  • Jr. Member
  • **
  • Posts: 12
Re: coin kit/CH 926 ACCEPTOR
« Reply #10 on: December 07, 2013, 12:48:26 PM »
so do you think that something may be wrong with the coin board...
or am I a div and done something wrong...... :)

Steve

  • Administrator
  • Hero Member
  • *****
  • Posts: 2313
    • Jukeblaster.com
Re: coin kit/CH 926 ACCEPTOR
« Reply #11 on: December 07, 2013, 05:47:29 PM »
Hi central

I opened up a Coin Kit to have a look and from what I can tell in your first picture it looks like you may have the Ground (Gnd) and the Coin (Coin) lines crossed over.
(Ps: my judgement is only based on the wire colours)
« Last Edit: December 07, 2013, 05:49:52 PM by Steve »
Send us some crypto :-)
It helps us pay for the forum and new jukebox developments


Bitcoin
bc1qlfjvxfpj75wcpraa5phvvxjpc9w7dxhd8y9s0k

Doge
DGvvJZ6JNxcGtSSbgjaNE5zDe13YWwaPVE


CENTRAL69

  • Jr. Member
  • **
  • Posts: 12
Re: coin kit/CH 926 ACCEPTOR
« Reply #12 on: December 09, 2013, 07:26:39 PM »
yup.i had the two wires round the wrong way. still don't work....my stupidity...don't know how the light was blue when it was wired wrong :..........so looks like ive damaged the board...do I have to pay £50 again or can this be fixed....idiots rates.....
 :( :( :( :( :( :( :( :( :( :( :( :( :( :( :(

Steve

  • Administrator
  • Hero Member
  • *****
  • Posts: 2313
    • Jukeblaster.com
Re: coin kit/CH 926 ACCEPTOR
« Reply #13 on: December 09, 2013, 09:05:23 PM »
Arrrrgh  :o, sorry to hear that central, unfortunately its not economical to repair :'(, just get another (and be careful wiring).
Send us some crypto :-)
It helps us pay for the forum and new jukebox developments


Bitcoin
bc1qlfjvxfpj75wcpraa5phvvxjpc9w7dxhd8y9s0k

Doge
DGvvJZ6JNxcGtSSbgjaNE5zDe13YWwaPVE


Steve

  • Administrator
  • Hero Member
  • *****
  • Posts: 2313
    • Jukeblaster.com
Re: coin kit/CH 926 ACCEPTOR
« Reply #14 on: December 09, 2013, 10:09:21 PM »
One thing i forgot to say is that you also need to check that the coin output line is not damaged on your coin acceptor as well :-/, I will ask our Bry how to do this when I see him as I'm not %100 sure myself, if anyone else knows please help...
Send us some crypto :-)
It helps us pay for the forum and new jukebox developments


Bitcoin
bc1qlfjvxfpj75wcpraa5phvvxjpc9w7dxhd8y9s0k

Doge
DGvvJZ6JNxcGtSSbgjaNE5zDe13YWwaPVE