JukeBlaster.com Forum

General Category => Coin Kit => Topic started by: Tony Neen on November 29, 2017, 10:22:16 AM

Title: "Warn, Couldn't read polling interval, set default 500ms"
Post by: Tony Neen on November 29, 2017, 10:22:16 AM
Anyone know what:

"Warn, Couldn't read polling interval, set default 500ms"

On Coin Kit Diagnostic page means ?

Cheers
Tony
Title: Re: "Warn, Couldn't read polling interval, set default 500ms"
Post by: Bry on November 30, 2017, 08:57:26 AM
it means that ur coin mech either dont have a polling interval setting or coinkit cant get interval from the mech
Title: Re: "Warn, Couldn't read polling interval, set default 500ms"
Post by: Tony Neen on November 30, 2017, 10:50:21 AM
Cheers, no need to worry then, Ta
Title: Re: "Warn, Couldn't read polling interval, set default 500ms"
Post by: Bry on December 01, 2017, 08:27:07 AM
if it works thers no need to worry what model is coin mech ?
Title: Re: "Warn, Couldn't read polling interval, set default 500ms"
Post by: Tony Neen on December 01, 2017, 09:24:34 AM
Hi, it's a SR3 coin mech. It's just something i was looking into to try and sort the problems i was having with the cheap PL2303HX USB to TTL to UART RS232 COM Cables.

Cheers