JukeBlaster.com Forum
General Category => Pub Jukebox => Topic started by: bellinngos on July 25, 2017, 03:41:27 PM
-
Hi
Could anyone tell me what “Keyboard Encoder” I need for a pulse coin acceptor.
Thanks Steve
-
i have the same Question...
Was searching on Ebay and Amazon for that...
Did you solve your Problem or did anyone else know the answer?
-
Theres tons on ebay ;D :- https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR1.TRC0.A0.H0.Xkeyboard+encoder.TRS0&_nkw=keyboard+encoder&_sacat=0
-
Yeah i have seen them.. but there are all different some of them are for Mame and Joysticks, some are just Chips...
I dont know wich ones to use...
Most of them are really expensiv, and i have to ship them to Germany too wich also cost alot extra.
I have seen that Video on Youtube where a Coin Acceptor was wired up to the Pc without that Encoder (With Usb Cable directly connectet to the Coin Acceptor Output Cable). Is that possible with Pulse giving Coin Acceptors too? or another way, or do a need that Keybpard Encoder on any case?
-
Hi, you can not wire a pulse coin acceptor directly to PC, you would use a keyboard encoder, or a ccTalk coin accepeptor with Coin Kit:- https://www.youtube.com/watch?v=CCpXqio99eg
https://jukeblaster.com/coinkit.html
-
But the CCTalk Encoder Boards are not sold anymore as far as i know? is just the Software now wich also needet the Coin Acceptor to be connectet wich a Keyboard Encoder? or did i missunderstand?
-
You dont need a board for ccTalk acceptor, watch the video!!! ;D
-
Iam sorry... its my fist Time dealing with that stuff...
So a CCTalk Coin Acceptor would be the SR3 und SR5 Coin Acceptors, they can be used with that Selfmade Usb Cable (Video) and the CCTalk Software.
The Other ones like CH-926 are Puls given and need a Keyboard Encoder (where i dont know wich ones) and are to use without the CCTalk Software.
Did i understand that right now? ^^;
-
Yes, you got it! :-)
-
Yay :D Thanks alot for helping me out :)
I try to get a SR3 then (Money Control)
I Still have no clue wich Keyboard Encoder i would need and how to wire it up. ^^;