Author Topic: coin controls c220b coin mech  (Read 4259 times)

Dj4nrv

  • Sr. Member
  • ****
  • Posts: 353
coin controls c220b coin mech
« on: December 07, 2011, 01:36:56 PM »
i have a c220b and a service klingon plus board, im told i should be able to get this working with vjb??
but really dont know where to start as im not too familiar with this coin mech.
im told goood things about the klingon? has anyone here had expirience with this setup?
any help here appreciated guys n gals.

Dj4nrv

  • Sr. Member
  • ****
  • Posts: 353
Re: coin controls c220b coin mech
« Reply #1 on: December 07, 2011, 02:10:05 PM »
right just found out its actually uk klingon 3.2 red pcb.

jukejohn

  • Hero Member
  • *****
  • Posts: 745
Re: coin controls c220b coin mech
« Reply #2 on: December 07, 2011, 02:36:50 PM »
yip ive worked with klingon boards not to sure about 3.2 ill take a look later

Dj4nrv

  • Sr. Member
  • ****
  • Posts: 353
Re: coin controls c220b coin mech
« Reply #3 on: December 07, 2011, 03:20:36 PM »
cheers john.

i might just go with the c220 and swap the clingon out for a coin kit?
all depends how much trouble it is connecting to pc , as i understand it these boards connect via a parallell port?

jukejohn

  • Hero Member
  • *****
  • Posts: 745
Re: coin controls c220b coin mech
« Reply #4 on: December 07, 2011, 03:51:28 PM »
yes you need the cable that connects from the parellell connector
to your credit board and then from the output of your credit board
to the coin kit board or does coin kit have a parell connection or
just a single input
eitherway ive learned you do need the parellell cable

Dj4nrv

  • Sr. Member
  • ****
  • Posts: 353
Re: coin controls c220b coin mech
« Reply #5 on: December 07, 2011, 04:26:00 PM »
i salvaged these pieces from a pga or golden tee golf game , cant remember which. but the loom got scrapped with the cab! DOH!
i have got more golf games to copy the loom from and some extra parallell connectors, so could remake a loom but i dont know what pins to solder onto, at the pc parallell end?? dont suppose anyones got any info on the pin configuration @ parallell end?
this could be more effort than its worth.
i feel another coin kit purchase coming on lol

cheers john.