JukeBlaster.com Forum

General Category => Your Pictures & Videos => Topic started by: Steve on February 17, 2012, 07:25:11 PM

Title: My Vaio Running Videobox
Post by: Steve on February 17, 2012, 07:25:11 PM

Log-in to see the pictures...

Title: Re: My Vaio Running Videobox
Post by: Dj4nrv on March 08, 2012, 08:24:40 PM

A little bit of an update for the vaio.
Added red LED lights x4.
fixed the KIM board to the back.
Soldered and wired a 12v in and out via the KIM board.
Added DATA GND and 12v wires and connections for coin acceptor.
Installed STFE and Added my own STFE Skin.

Title: Re: My Vaio Running Videobox
Post by: Dj4nrv on March 08, 2012, 08:26:40 PM

My skin for STFE.

Title: Re: My Vaio Running Videobox
Post by: Dj4nrv on March 08, 2012, 08:27:53 PM

No ...... here's my STFE SKIN.

Title: Re: My Vaio Running Videobox
Post by: Dj4nrv on March 08, 2012, 08:33:15 PM

And here's my KIM and the loom i made.
As you can see there's a single red LED light and an sr3 coin acceptor too.Both are powered via the same 12v psu.

Title: Re: My Vaio Running Videobox
Post by: Dj4nrv on March 08, 2012, 08:35:13 PM

And a close up of the KIM.