Author Topic: Turn off certain switches (coinkit/coin mech)  (Read 1917 times)

Laurence

  • Full Member
  • ***
  • Posts: 98
Turn off certain switches (coinkit/coin mech)
« on: June 06, 2016, 03:48:35 AM »
i would like to suggest a feature for coinkit/coinmech/coin kit software

being able to turn off certain switches.
example:
Switch 1 = 10p (old)
Switch 2 = 20p
Switch 3 = 50p
Switch 4 = £1
Switch 5 = £2
Switch 6 = 10p (new)

would there be a way we could disable switch 1 and enable a different switch for the new coins IF the coin mech has been reprogrammed to accept new coins.
plus if switch 1 is disabled it would reject the coins
Laurence

Steve

  • Administrator
  • Hero Member
  • *****
  • Posts: 2073
    • Jukeblaster.com
Re: Turn off certain switches (coinkit/coin mech)
« Reply #1 on: June 06, 2016, 09:33:29 AM »
Hi Laurence

Coin Kit soft already has this feature, check the 'Inhibit' switches.

Laurence

  • Full Member
  • ***
  • Posts: 98
Re: Turn off certain switches (coinkit/coin mech)
« Reply #2 on: June 06, 2016, 09:36:15 AM »
is there a way to disable a inhibit on videobox or coinkit. as currently i'm wired to coinkit.
Laurence

Laurence

  • Full Member
  • ***
  • Posts: 98
Re: Turn off certain switches (coinkit/coin mech)
« Reply #3 on: June 06, 2016, 09:37:37 AM »
i'm aware of the coinkit software has the feature. just never managed to get software to pick up my SR5/SR5i coin mech.
Laurence

Steve

  • Administrator
  • Hero Member
  • *****
  • Posts: 2073
    • Jukeblaster.com
Re: Turn off certain switches (coinkit/coin mech)
« Reply #4 on: June 06, 2016, 09:39:05 AM »
What problem did you have ?

Laurence

  • Full Member
  • ***
  • Posts: 98
Re: Turn off certain switches (coinkit/coin mech)
« Reply #5 on: June 06, 2016, 09:41:43 AM »
the coin mech just wasn't registering, but it registered using the coin kit board. could of been to do with possibly miss wiring and i'm not use to terminal crimping. so that could be the issue i had. but i will most deffinatly have a look when i get a spare SR5/SR5I
Laurence