Author Topic: nsm evolution project  (Read 8822 times)

colin.cc22

  • Guest
Re: nsm evolution project
« Reply #15 on: October 02, 2012, 06:27:42 PM »
here  is closer pictures if any good am looking on ebay at car amp so many to choose


jukejohn

  • Hero Member
  • *****
  • Posts: 726
Re: nsm evolution project
« Reply #17 on: October 02, 2012, 09:12:57 PM »
yip that should do the job

jukejohn

  • Hero Member
  • *****
  • Posts: 726
Re: nsm evolution project
« Reply #18 on: October 04, 2012, 08:04:43 PM »
also the touch screen is a zyrtonic touch through glass [capacative] and the driver for that is no longer available from them so you will have to hunt it down that should be top of your list or see if you can copy it of the hd

colin.cc22

  • Guest
Re: nsm evolution project
« Reply #19 on: October 04, 2012, 09:13:33 PM »
hi got the zytronc drivers,already put it on works a treat,just waiting for my amp to come hopefully tomorrow.put videobox demo on just to test,runs slow but works,considering iv only got 256 ram,so i will try tomorrow with either a 500mb ram or 1gb one,if that works idont need to change the mother board,if it does not work i have a p4 motherboard.

jukejohn

  • Hero Member
  • *****
  • Posts: 726
Re: nsm evolution project
« Reply #20 on: October 05, 2012, 11:57:43 AM »
p4 would be loads better the via epia m1000 or ok but mainly used for low level kiosk
stuff using 98/xp embedded so havent got alot of clout